GL-2000

Inquire Now Next

Product Details

It covers an area of only 3m2 and has strong processing capacity. The maximum processing diameter is 260mm, and the maximum rotation diameter of the workpiece can reach 480mm. It has a series of advantages such as high rapid movement speed, high tool change accuracy, and short tool change time.

8" hydraulic chuck speed can reach 4000rpm, 11KW spindle drive series can provide 70Nm torque

Can be equipped with turning center

Japanese/Taiwan brand linear guides, zero clearance, all-round bearing, and high-precision ball screws can completely eliminate errors caused by long-term processing, the machine tool moves four-degree blocks, and the machined parts are highly accurate.

The whole body is equipped with fully enclosed sheet metal, which has superior waterproof performance and convenient chip removal. Taiwan's high-speed hollow hydraulic rotary cylinder meets the stability of high-speed cutting and high-speed spindle operation. High precision, low vibration and long service life.

Product Size

None

Product Parameters

Technical Parameter
Name	Project	Nnit	GL2000	GL2000M
Spindle	Spindle nose form		A2-6	A2-6
	Spindle through hole diameter	mm	61	61
	Three-jaw chuck holding capacity	mm	8〞/∅210	8〞/∅210
	Pull rod action form		液压	液压
	Spindle motor power	KW	11/15	11/15A
Drive System	Spindle maximum speed	rpm	4500	4500
	X-axis servo motor power	发那科	12/3000	12/3000
	Z-axis servo motor power	发那科	12/3000	12/3000
	Maximum body rotation	mm	480	500
Processing range	Maximum machining workpiece length	mm	450	450
	Maximum machining workpiece diameter	mm	260	260
	Maximum tie rod through hole diameter	mm	∅52	52
X/Z axis	X-axis travel	mm	220（150）	220（150）
	Z-axis travel	mm	480（450）	460（420）
	X/Z axis rapid traverse rate	m/min	20	20
Precision	Positioning accuracy		±0.005	±0.005
Precision	Repeatability		±0.003	±0.003
Row of knives	Center high		80	80
	Turret drive form		伺服刀塔	动力伺服刀塔
	Number of tools		8/12	12
	Square knife holder specification	mm	25	20/25
	Boring Holder Specifications	mm	32/40	32
	Power Tool Holder Specifications	bar	20/25	BMT45
	Power tool holder speed	mm	/	3000/4000
Water tank	Cutting water tank capacity		120	120
Water tank	Cutting water pressure		2.3	2.3
Electricity demand	Voltage		380	380±10%
	Power		22	22
	Phase number		3	20/30
	Frequency		50/60	1900×1450×1650
Machine size	length x width x height	mm	2070 1580 1750	2070 1580 1750
Machine size	Weight	kg	3000	3100